Pullman Barista Tamper Oak Handle
Pullman Barista bases 304
All Pullman Barista Tamper parts are made in Australia from premium grade materials, so you can be assured of the highest quality results
A precision-machined stainless steel tamper base with TrueTamp rings for a consistent and level tamp
An ergonomic synthetic rubber compression zone for maximum comfort and to minimize high-volume fatigue
A set of three stackable straight-sided stainless steel spacers, providing up to 15 mm of height adjustment in eight steps (0, 2, 5, 7, 8, 10, 13, 15 mm) without compromising the tamper’s ergonomics.
No two hands are the same and research has shown a wide variety of optimum handle heights are useful depending on the operator’s hand size.
- Stainless Steel Grade: 304 high Grade
- Tamper Base Profile: Flat
- Tamper base Size: 58 mm
Pullman Barista AL Handle
The Barista was primarily designed for use with an anodized aluminium handle and in this combination will provide a balanced tamper. It is the most resilient of the three materials and with a choice of nine colours it has the widest and arguably the most striking aesthetic spectrum.
The strength and balance of this handle would make it an ideal choice for a commercial outfit or for a home barista looking for a tamper with a contemporary look. Aluminium is an inherently soft material and anodizing is a process that affects the surface of the aluminium itself, making it harder and allowing the application of colour at the same time. So what you touch is not paint but metal with a hardened surface to make it more resistant to dents. The tamper’s impervious materials mean it can be easily washed or wiped to get it clean in a flash, and the intense colours provide a great contrast for custom engraving.
- Provides a balanced tamper
- Black colour
- Easily cleaned
- Cold and smooth to the touch
- Custom engraving contrasts well
Care and Maintenance
Tampers with acetal plastic or anodized aluminium handles are all impervious to boiling water and common cleaning agents so can be washed or wiped as required. Do not clean in commercial dishwashers or any harsh or caustic chemical cleaners such as bleach or caustic soda, and do not allow any chemicals to dry on the tamper. Tampers with wooden handles are pre-treated with Danish Oil and will absorb skin oils during normal use so it should not need any re-oiling. If the handle gets dirty, a quick wipe with a damp cloth is adequate, but do not allow wooden handles to get overly wet. If you find the wood is getting dry, a coat of wood oil, boiled linseed oil or even Canola oil can be beneficial to the wood, but make sure you wipe it all off after a few minutes to ensure a dry, dust-free surface. These oils are not as good as Danish Oil but they should work.
The base can be unscrewed for cleaning if you wish, however once again a wipe with a damp cloth will remove any dried coffee residue. If you find the surface of either the base or handle has become damaged through hard use, we can arrange to have these restored for you.